Brightness Control

When the position lights are turned on and the ignition switch is in ON II*1, you can use the (select/reset) knob to adjust instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.

You will hear a beep* when the brightness reaches minimum or maximum. The information display/multi-information display will return to its original state several seconds after you adjust the brightness.

*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.

Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.

Pressing the knob switches the display.

If you turn the knob to the right until the brightness display is up to max, the beeper* sounds. This cancels the reduced instrument panel brightness when the exterior lights are on.

Models with multi-information display
Pressing either (information) button switches the display.

Brightness level indicator

The brightness level is shown on the information display/multi-information display while you are adjusting it.

* Not available on all models