The audio/information screen can display your vehicle’s rear view. The display automatically changes to the rear view when the shift lever is moved to R.
- Failure to visually assess the area around the vehicle (directly or by use of the mirrors) may result in a crash causing serious injury or death.
The areas shown in the multi-view camera system display are limited. The display may not show all pedestrians or other objects around your vehicle.
Do not solely rely only on the multi-view camera system display to assess whether it is safe to move your vehicle.
- Failure to pay proper attention to your surroundings while driving may result in a crash causing serious injury or death.
To help mitigate the chances of a collision, only look at the multi-view camera system display when it is safe to do so.
The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.Visually confirm that it is safe to drive before backing up. Certain conditions, such as weather, lighting, and high temperatures, may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle.If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.You can change the Fixed Guideline and Dynamic Guideline settings.
On: Guidelines appear when you shift into R.
Off: Guidelines do not appear.
On: Guidelines move according to the steering wheel direction.
Off: Guidelines do not move.
If the last used viewing mode is Wide or Normal, the same mode is selected the next time you shift into R. If Top View is last used before you turned off the engine, Wide mode is selected next time you turn the ignition switch to ON II and shift to R.