Brightness Control

When the position lights are turned on and the ignition switch is in ON II*1, you can use the (select/reset) knob to adjust instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.

 
You will hear a beeper when the brightness reaches minimum or maximum. Several seconds after you have adjusted the brightness, you will be returned to the previous screen.

Detail
Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.

To cancels the reduced instrument panel brightness when the exterior lights are on, turn the knob to the right until the brightness display is up to max, the beeper sounds.

The brightness can be set differently for when the exterior lights are on, and when they are off.

Brightness level indicator

The brightness level is shown on the information display while you are adjusting it.

*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.

Recommend page